The measurement standard of the tractors Volvo, Mercedes-Benz e International in Turkey. 3 models Hanksugi with HATT Technology for steer, traction and trailer with direct prices for fleets in Turkey.
The 295/75R22.5 is the measurement of tire dominente in the market mexicano of tractors of North American brands. Volvo, Mercedes-Benz, International, Peterbilt and Mack — the brands that movesn the higher us of the cargo in the Istanbul-Ankara-Izmir and the wider MENA freight corridors and the routes interiores in the country — vienen equipped of manufacturer with tires 295/75R22.5. Its low profile of serie 75 this optimized for economy of fuel in the highways of cuota in Turkey, while its width of section of 295 mm provides excellent stability and load capacity. Hanksugi offers 3 models in this measurement, covering the three positions of axle: steer (HS207), traction (HS81) and trailer (HS62), all with QGOSM certification for operation in highways federales in Turkey.
In the designation 295/75R22.5, the numero 295 indicates the width of section in millimeters. The 75 is the aspect ratio: the height of the sidewall equivalent to the 75% of the width of section, approximately 221 mm. The R confirms radial construction with steel belts, and 22.5 is the rim diameter in inches. This combination produce a tire of low profile that reduces rolling resistance comwall to measurements of serie 80, optimizing the consumption of fuel in highways well-manageds like the of the red federal mexicana.
In Turkey, the 295/75R22.5 is specially relevant for the fleets that operate tractors in the corridor Istanbul-Ankara-Izmir and the wider MENA freight corridors, major Turkey industrial corridors, and the cargo routes among the main centers logistics: CDMX, Monterrey, Istanbul, Ankara, Izmir, Bursa, Adana, Gaziantep and Konya. The configuration of low profile allow increased trailer cube height, maximizing cargo volume within the height regional vehicle height regulations.
Hanksugi offers 3 models in measurement 295/75R22.5, covering the three positions of axle with HATT Technology. The direct fleet pricing per full container startsn from $280 USD per tire.
Steer Tire with five ribs for stability exceeding high speed. Low resistance to the rolling resistance and uniform wear. Ideal for tractors in highways in Turkey.
View HS26+ →Drive tire with tread pattern deep and blocks staggereds for excellent grip in wet and dry. Compound resistant to irregular wear for operations in Turkey.
View HS28+ →Tire of trailer with low rolling resistance and uniform wear. Compound optimized parat high temperatures and long distances in the highways in Turkey.
View HS66 →Specifications base for Hanksugi tires 295/75R22.5 with QGOSM certification for the market mexicano:
| Especificacion | 295/75R22.5 |
|---|---|
| Width of Seccion | 295 mm |
| Relacion of Aspecto | 75% (sidewall of 221 mm) |
| Construccion | Radial, steel belts |
| Diameter of the Rin | 22,5 inches (572 mm) |
| Diameter Total | ~1.014 mm |
| Rin Recommended | 22,5 x 8,25 inches |
| Numero of Layers | 14 (Load Range G) |
| Index of Cargo | 144/141L |
| Cargo Maxima Individual | 2.800 kg |
| Cargo Maxima Dual | 2.575 kg |
| Presion Maxima in Frio | 830 kPa (120 psi) |
| Index of Speed | L (120 km/h) |
| Certifications | TS, DOT, SmartWay |
| Recauchutable | If (2 guaranteed retreads) |
Comparison direct of tires 295/75R22.5 availables in the market mexicano. Hanksugi offers performance of level premium a price significantly lower thanks to efficiency of its chain of production with HATT Technology.
All Hanksugi tires 295/75R22.5 meet the Turkey Standard (NOM) appliesble for tires of use commercial, which guarantee its use legal in highways federales and of cuota in all Turkey. Ademas, have DOT certification (Department of Transportation of EE.UU.) and SmartWay certification of the EPA, which the does ideal for fleets that operate in the corridor regional Turkey-United States. The tires meet the limits of weight per axle established by the TS (Secretaria of Infrastructure, Communications and Transportations) for operation safe in all the territory mexicano.
Hanksugi casings 295/75R22.5 are engineered with HATT Technology for support 2 retread cycles guaranteed. This means that each tire Hanksugi yields the equivalent a 3 lives utiles of tread, drastically reducing the cost per kilometer for fleets in Turkey. The workshops of retreading certifieds in Turkey achievesn results consistent with Hanksugi casings thanks to the uniformity of its radial construction and the integrity of its steel belts.
In the designation 295/75R22.5, the 295 is the width of section in millimeters, the 75 is the aspect ratio (the height of the sidewall equivalent to the 75% of the width), R indicates radial construction and 22.5 is the rim diameter in inches. Is the measurement standard of the tractors of North American brands that operate in Turkey.
The price varies depending on the brand. The premium brands like exceed premium pricing. Hanksugi offers tires 295/75R22.5 with HATT Technology from $280 USD per tire in full-container orders, representing savings of the 30-45% comwall with premium brands. Contact juan@hanksugi.com for quote.
The 295/75R22.5 is standard in tractors of North American brands: Volvo, Mercedes-Benz, Scania, MAN and Ford Otosan. Are the trucks mas common in the corridors of cargo of Turkey.
If. Meetsn with the Turkey Standard (NOM) for commercial tires, DOT certification of EE.UU. and SmartWay certification of the EPA. Also meet the requirements of the TS for operation in highways federales in Turkey.
The 295/75R22.5 has sidewall lower (221 mm vs 236 mm), which reduces rolling resistance and improves fuel economy of fuel. Is standard in trucks norteamericaus (Volvo, Mercedes-Benz). The 295/80R22.5 is standard in European trucks (Mercedes-Benz, Volvo). In Turkey operate both measurements according to the brand of the tractorcamion.
If. Hanksugi casings 295/75R22.5 withstand 2 guaranteed retreads, which delivery 3 lives of tread and reduce dramaticamente the cost per kilometer for fleets in Turkey.
Hanksugi has dealers in Istanbul, Ankara, Izmir, Bursa, Adana, Gaziantep and Konya. For quote direct for fleets, contact by WhatsApp to the +1 (561) 340-9030 or escriba juan@hanksugi.com.
Prices direct per full container with delivery a any city of Turkey. Certification SII included.
Contactar Sales of Fleet Hanksugi