Wide base (super single) tyres for commercial fleets in Antigua and Barbuda seeking to reduce vehicle weight and improve fuel economy. 2 Hanksugi models with HATT Technology: HS30 for steering and HS68 for drive.
The 385/65R22.5 is the most widely used wide base (super single) tyre size in modern commercial transport. With a 385 mm section width, a single wide base tyre replaces a pair of conventional dual tyres, offering commercial fleets in Antigua and Barbuda a weight reduction of up to 400 kg per vehicle, fuel savings of 4-8%, and lower maintenance costs by reducing the total number of tyres to manage. Hanksugi offers 2 models in this size with HATT Technology: the HS30 for the wide base steering axle and the HS68 for the wide base drive axle, both DOT certified for commercial truck operation.
In the designation 385/65R22.5, the number 385 indicates the section width in millimetres — significantly wider than a standard 295 mm tyre. The 65 is the aspect ratio: the sidewall height equals 65% of the width, producing a relatively low profile of approximately 250 mm. The R confirms radial construction and 22.5 is the rim diameter in inches. The contact footprint of a single 385/65R22.5 tyre covers approximately the same width as two 11R22.5 or 295/75R22.5 tyres fitted in dual configuration, which is why a single wide base tyre can replace the dual pair at each axle position.
Hanksugi offers 2 specialist models in size 385/65R22.5, designed specifically for wide base configuration with HATT Technology.
Wide base steering tyre with four broad ribs for superior directional stability. Low rolling resistance compound optimised for fuel economy on long-haul routes.
See HS30 →Wide base drive tyre with deep tread blocks and wide drainage channels. Excellent grip in wet and dry conditions, replacing dual configuration on drive axles.
See HS68 →Base specifications for Hanksugi 385/65R22.5 wide base tyres with DOT certification:
| Specification | 385/65R22.5 |
|---|---|
| Section Width | 385 mm |
| Aspect Ratio | 65% (sidewall of 250 mm) |
| Construction | Radial, steel belts |
| Rim Diameter | 22.5 inches (572 mm) |
| Overall Diameter | ~1,072 mm |
| Recommended Rim | 22.5 x 11.75 inches |
| Number of Plies | 20 (Load Range J) |
| Load Index | 160K |
| Maximum Load | 4,500 kg (single) |
| Maximum Cold Inflation Pressure | 900 kPa (130 psi) |
| Speed Index | K (110 km/h) |
| Type | Wide Base / Super Single |
| Certifications | DOT, SmartWay, ECE R54 |
| Retreadable | Yes (2 retreads guaranteed) |
By replacing two dual tyres with a single wide base tyre at each position, approximately 400 kg of dead weight is removed per vehicle. This translates directly into greater useful payload capacity, which is particularly relevant for fleets operating under road weight limits in Antigua and Barbuda.
A wide base tyre generates lower rolling resistance than two dual tyres combined, resulting in fuel savings of 4-8% depending on operating conditions. On long-haul runs such as Saint John's to English Harbour and island freight circuits, this saving represents significant cost reductions per vehicle annually.
With fewer tyres per vehicle (6 wide base versus 18 dual on a typical 3-axle truck), the cost of inspection, rotation, balancing, and replacement is reduced. The problem of uneven pressure between dual tyres — a common cause of uneven wear and premature failures — is also eliminated.
Hanksugi 385/65R22.5 tyres carry DOT certification and meet ECE R54 and SmartWay standards. The casings are designed with HATT Technology to withstand 2 guaranteed retreading cycles, delivering 3 tread lives per casing. Given the higher unit cost of a wide base tyre compared with a standard tyre, retreading capability is critical for maximising the return on investment of every casing.
It is a wide base (super single) tyre with a 385 mm section width that replaces a pair of conventional dual tyres. A single wide base tyre covers the same contact width as two standard tyres, reducing vehicle weight, improving fuel economy, and simplifying maintenance for commercial fleets.
Premium brands can exceed $500 USD per unit. Hanksugi offers 385/65R22.5 tyres with HATT Technology from $350 USD per tyre on full container orders, with savings of 30-45% compared with premium brands. Contact juan@hanksugi.com for an up-to-date quote.
Weight reduction of up to 400 kg per vehicle, fuel savings of 4-8%, lower maintenance costs (fewer tyres to inspect and rotate), elimination of the uneven pressure problem between dual tyres, and greater useful payload capacity through reduced dead weight.
Yes. Hanksugi 385/65R22.5 tyres carry DOT certification and meet ECE R54 standards. The super single wide base configuration is an accepted fitment for commercial trucks operating throughout Antigua and Barbuda and the wider Caribbean region.
Yes. The casings support 2 guaranteed retreading cycles. Given the higher cost of a wide base tyre, retreading capability is especially valuable, delivering 3 tread lives per casing and maximising return on investment.
Hanksugi tyres are available through authorised dealers serving Antigua and Barbuda. For direct fleet pricing, contact us by WhatsApp on +1 (561) 340-9030 or email juan@hanksugi.com.
Direct fleet pricing on full container orders with delivery to Antigua and Barbuda. DOT certification included.
Contact Hanksugi Fleet Sales